| You are here:
Home Page › Measuring
Tools ›Parallels
› 4 Pair Parallel Sets |
| |
|
|
|
-
Tolerance:
Parallel 0.0003" on 2 sides
-
Hardness: Case
hardened to HRC55 to 62 on 2 sides top and bottom only
-
The holes are
designed for easier handling and set-ups
-
Fine quality
tool Steel
|
|
4 Pair 3/16" Set |
| 3/16"x1"x6" with 5/16" hole |
Set of 4 Pair in wooden box
Order No. 81-08-200 |
| 3/16"x1-1/4"x6" with 3/8" hole |
| 3/16"x1-1/2"x6" with 7/16" hole |
| 3/16"x1-3/4"x6" with 1/2" hole |
|
|
4 Pair 1/2" Set |
| 1/2"x1"x6" with 5/16" hole |
Set of 4 Pair in wooden box
Order No. 81-09-200 |
| 1/2"x1-1/4"x6" with 3/8" hole |
| 1/2"x1-1/2"x6"' with 7/16" hole
|
| 1/2"x1-3/4"x6" with 1/2" hole |
|
|
4 Pair Matched |
| 1/2"x1-1/2"x6" with 5/16" hole |
Set of 4 Pair in wooden box
Order No. 81-07-200 |
| 1/2"x1-3/4"x6" with 3/8" hole |
| 3/16"x1"x6" with 7/16" hole |
| 3/16"x1-1/4"x6" |
|
|
|
| |
| |
|
|
|
Parallels are used to support a workpiece
when clamping it in a milling vise. They are pairs of steel rectangles that
are accurately matched in height. In use, the parallels are placed adjacent
to each jaw of the milling vise and the workpiece is supported by the
parallels such that the workpiece is exactly parallel with the base of the
milling vise, and thus with the milling table. Parallels come in sets in
which the length and thickness are common to all, with pairs varying
incrementally in height. |
